Table of Contents¶

nimbleclient.v1.api.fibre_channel_interfaces¶

class FibreChannelInterface(Resource)

Represent information of specified Fibre Channel interfaces. Fibre Channel interfaces are hosted on Fibre Channel ports to provide data access.

Parameters

id : Identifier for the Fibre Channel interface.
array_name_or_serial : Name or serial number of array where the interface is hosted.
partial_response_ok : Indicate that it is ok to provide partially available response.
controller_name : Name (A or B) of the controller where the interface is hosted.
fc_port_id : ID of the port with which the interface is associated.
name : Name of Fibre Channel interface.
wwnn : WWNN (World Wide Node Name) for this Fibre Channel interface.
wwpn : WWPN (World Wide Port Name) for this Fibre Channel interface.
peerzone : Active peer zone for this Fibre Channel interface.
online : Identify whether the Fibre Channel interface is online.
firmware_version : Version of the Fibre Channel firmware.
logical_port_number : Logical port number for the Fibre Channel port.
fc_port_name : Name of Fibre Channel port.
bus_location : PCI bus location of the HBA for this Fibre Channel port.
slot : HBA slot number for this Fibre Channel port.
orientation : Orientation of FC ports on a HBA. An orientation of 'right_to_left' indicates that ports are ordered as 3,2,1,0 on the slot. Possible values: 'left_to_right', 'right_to_left'.
port : HBA port number for this Fibre Channel port.
link_info : Information about the Fibre Channel link at which interface is operating.
fabric_info : Fibre Channel fabric information.