Table of Contents¶
nimbleclient.v1.api.disks¶
Disk¶
class Disk(Resource)
Disks are used for storing user data.
Parameters
- id : ID of disk.
- is_dfc : Is disk part of dual flash carrier.
- serial : Disk serial number(N/A if empty).
- path : Disk SCSI device path.
- shelf_serial : Serial number of the shelf the disk is attached to.
- shelf_location : Identifies the controller, port, and chain position of the shelf the disk belongs to.
- shelf_id : Identifies the physical shelf the disk belongs to.
- shelf_location_id : Identifies the position shelf the disk belongs to, as coded integer.
- vshelf_id : Identifies the local shelf ID the disk belongs to.
- slot : Disk slot number.
- bank : Disk bank number.
- model : Disk model name.
- vendor : Vendor name of the disk manufacturer.
- firmware_version : Firmware version on the disk.
- hba : HBA ID the disk is connected to.
- port : HBA port number the disk is connected to.
- size : Disk size in bytes.
- state : Disk hardware state.
- type : Type of disk (HDD, SSD, N/A).
- block_type : Native block type of the disk.
- raid_id : Raid ID.
- raid_resync_percent : Percentage RAID rebuild completed on this disk.
- raid_resync_current_speed : Current RAID rebuild speed (bytes/sec).
- raid_resync_average_speed : Average RAID rebuild speed (bytes/sec).
- raid_state : RAID status for the disk (N/A, okay, resynchronizing, spare, faulty).
- disk_internal_stat_1 : Internal disk statistic 1.
- smart_attribute_list : S.M.A.R.T. attributes for the disk.
- disk_op : The intended operation to be performed on the specified disk.
- force : Forcibly add a disk.
- array_name : Name of array the disk belongs to.
- array_id : ID of array the disk belongs to.
- partial_response_ok : Indicate that it is okay to provide partially available response.